Green Rhapsody Necklace
For the appearance of a sunny spring mood, it is not necessary to wait for spring and the sun, you can create it yourself. At any time of the year, in order to change your internal sensations, you need to surround yourself with pleasing things, and even better to decorate yourself with them. a burst of emotion through decoration. To do this, make a unique air necklace of the original design with your own resources. The necklace will consist of two parts that make up a single ensemble and are connected by a lock.It will require:9. Put on a hat on the pin. 10. We take the second part of the necklace, the pin, the cap, the round pliers and the pliers. We perform the same operations as with the first pin, unclench its ring and put it on the connecting ring. Wear a hat.
Using a ruler or an eye, we measure a thread with a length equal to two lengths of the intended length of the desired side plus 10-15 cm. The thread should be folded doubly. We fix the thread on the ringlet and use the bead needle to collect the thread with beads in the next order e: 3 pieces of glass (only at the very beginning once), 1 bead, 1 glass, and so on to the desired length. All threads of the necklace will start with 3 pieces of green glass. This is necessary so that the necklace looks neat and symmetrical. In the future, most of the glass beads will be inside the caps. The length of the thread before the beginning of the next stage will be approximately 23 cm. 2.We collect the thread further and instead of beads of 5 mm in size, we use 8 mm beads - 7 pcs. We don’t wear glass beads before the first one.3. Then we place a string with beads in the form of a loop and pass it through the first bead of 8 mm. We continue to collect a string with beads of 5 mm each in the amount of 32 pieces.4. Last we wear 3 pieces of green glass beads and fasten the thread on the ring.5. For the next step, take the green glass beads, transparent beads, mylar threads, a needle for beads, a connecting ring.We measure the thread twice as long as at least 40-45 cm and fix it on the ring. 6. We collect threads with beads. We start all the threads with three pieces of glass beads. There will be 9 pieces of thread 31-33 cm long. Each thread will have different sequence of beads and glass beads, namely: 1 glass beads: 1 bead, 1: 2, 1: 3, 1: 4, 1: 5, 2: 1, 3: 1, 4: 1, 5: 1.7.We take the first part of the necklace, pin, cap, round nose pliers, nippers.8. Expand the ring of the pin and put it on the connecting ring. If you have a special tool for opening connecting rings of this type, then it is better to use it for convenience. Also this prevents the deformation of the pin.
- fine-nose pliers, round-nose pliers, side cutters (they are called pliers by people),
- polyester thread 22M, needle for beads, scissors,
- small transparent colorless beads,
- bright green small short glass beads,
- colorless transparent beads 5 mm (64 pieces) and 8 mm (7 pieces),
- 2 double connectingringlet,
- 2 caps,
- screw lock,
- steel color chain, at least 10 cm long,
- 2 pins ending in a loop.
How to make a bench
Probe indicator without batteries
Delicious and unusual dishes from peach
How to make homemade cream
What is steam
What is a bond
How to cook meringue
How to protect the skin from frost