• Lightning necklace

    Lightning is one of the most popular types of fasteners. Recently, the zipper is at the height of popularity. Very fashionable are products with a large amount of lightning. A huge number of things made from lightning: clothes, handbags, jewelry. Original products from lightning can be made by hand. For example, you can make a stylish necklace. For this you need: 1. Lightning (3 pieces of 18-20 cm) 2. satin ribbon (40 cm) 3. fastener 4. beads (5 pieces) 5. superglue 6. thread 7. needle 8. scissors 9. take a small piece of adhesive paper or fabric Step 1. Take one zipper, cut the fabric from the bottom and along the edges, leaving 0.5-0.7 cm from the edge of the teeth. Cropped scorch the edges with matches or a lighter.
     We take one lightning
    Unzip the zipper. On the top edge we sew a bead. We begin to turn the right edge of the lightning clockwise, the left - against. Each turn is well fastened with several stitches from the back.
    In this way we get the right and left circle in the center with a slider.This element will serve as the center of the necklace.
     right and left circle
    Step 2. Take the second lightning and divide it into two parts. Runner save, it is useful to us. Cut off excess tissue, leaving 0.5-0.7 cm from the edge of the denticles. Cut off the edges of cut.
     Take the second lightning
    Each part of the zipper is folded into a circle, fixing each turn with several stitches.
    we turn in a circle
    Step 3. We also divide the third zipper into two parts, cut and sing the edges. Runner save. We divide each part in half, we get four parts. We form a figure of eight from each part.
     divide into parts
     fixing every turn
     we cut and sing edges
    Step 3. We divide the satin ribbon into two parts, singe the edges and connect with a clasp.The necessary fastener can be removed from the already outdated and unnecessary decorations or bought in the department of sewing accessories.
     Divide the satin ribbon
    unnecessary decoration
    Step 4. Alternately sew the finished parts together, getting the central part of the necklace.
     Alternately sew
     getting the centerpiece of the necklace
    Step 5. Sew the already prepared ribbon with clasp to the edges of the central part of the necklace. Thread stitches are visible on the seamy side of the necklace. In order for the work to look more accurate, they must be closed. We take adhesive paper or simply fabric, cut out a piece to form a necklace and glue it with glue, closing thread stitches.
     Sew the harvested tape
     just cloth
    lightning necklace
    Step 6. Glue three beads.Two previously removed with a zipper runner glued at the edges.  necklace from lightning
    Step 7. To make a necklace well lay on the neck, on both sides lay the folds and fix them with glue. The necklace is ready for fitting.
     lightning necklace
    Result of work.
     necklace from lightning
    lightning necklace

    Related news

    How to become a mermaid in the afternoon
    How to buy poop
    Who did you dream to become as a child And did you become If not, then who became
    How to make a bed
    What is a dynasty