• What is electric current in simple terms?

    Every person has an abstract concept of electric current. For an electrical appliance, the power source is something like a source of air for any breathing organism. But on these comparisons the understanding of the nature of the phenomenon is limited, and only specialists understand the essence more deeply.

    In the school curriculum, all take a course in physics, which describes the basic concepts and laws of electricity. A dry, scientific approach does not arouse children's interest, so most adults have no idea what an electric current is, why it arises, how it has a unit of measure, and how anything can move through fixed metal wires at all, and even make electrical appliances work.

    Simple words about electric current

    Light bulb

    The standard definition from the school textbook on physics laconically describes the phenomenon of electric current. But frankly speaking, it's possible to fully understand this if you study the subject much deeper. After all, the information is presented in another language - scientific.It is much easier to understand the nature of a physical phenomenon, if you describe everything in a familiar language that anyone can understand. For example, the current in the metal.

    We should start with the fact that everything that we consider to be firm and motionless is only in our view. A piece of metal lying on the ground is a monolithic motionless body in human understanding. For analogy, let's imagine our planet in space, looking at it from the surface of Mars. The earth seems to be a whole, motionless body. If we approach its surface, it becomes obvious that this is not a monolithic piece of matter, but a constant movement: water, gases, living beings, lithospheric plates - all this moves non-stop, although it can not be seen from distant space.

    Let's return to our piece of metal lying on the ground. It is motionless because we look at it from the side as a monolithic object. At the atomic level, it consists of constantly moving minute elements. They are different, but among all, we are interested in electrons, which create in metals an electromagnetic field that generates the very current. The word "current" must be understood literally,because when the elements with electric charge move, that is, "flow" from one charged object to another - then an "electric current" occurs.

    Having dealt with the basic concepts, we can derive a general definition:

    An electric current is a stream of charged particles moving from a body with a higher charge to a body with a lower charge.

    To more accurately understand the essence, you need to delve into the details and get answers to several basic questions.

    Video plot

    Answers to major questions about electrical current

    After formulating the definition, several logical questions arise.

    1. What makes the current "flow", that is, move?
    2. If the smallest metal elements are constantly moving, then why is it not deformed?
    3. If something flows from one object to another, does the mass of these objects change?

    The answer to the first question is simple. As water flows from a high point to a low point, so the electrons will flow from the body with a high charge into the body with a low, obeying the laws of physics. And “charge” (or potential) is the number of electrons in the body, and the more of them - the higher the charge. If a contact is made between two bodies with different charges - electrons from a more charged body will flow into a less charged one.This will create a current that ends when the charges of the two contacting bodies are equalized.

    To understand why the wire does not change the structure, despite the fact that it is constantly moving, you need to imagine it as a big house in which people live. The size of the house will not change as to how many people enter and leave it, and also move inside. The man in this case is an analogue of an electron in a metal - he moves freely and does not have a special mass in comparison with the whole building.

    If electrons move from one body to another - why the mass of bodies does not change? The fact is that the weight of the electron is so small that even if all the electrons are removed from the body, its mass will not change.

    What is the current measurement unit

    Sunset

    To "calculate" the electric current, different units of measurement are used, we will disassemble three main ones:

    • Current strength
    • Voltage.
    • Resistance.

    If you try to describe the concept of current strength in simple words, it is best to imagine the flow of cars passing through the tunnel. Cars are electrons, and the tunnel is wire. The more cars pass at one time through the cross section of the tunnel - the greater is the current strength, which is measured by an instrument called an “ammeter” in Amperes (A),and in formulas it is designated by the letter (I).

    Voltage is a relative value that expresses the difference in the charges of bodies between which current flows. If one object has a very high charge and the other is very low, then there will be a high voltage between them, for the measurement of which a “voltmeter” device is used and a unit called Volt (V). In formulas it is identified by the letter (U).

    Resistance characterizes the ability of a conductor, conventionally copper wire, to pass through a certain amount of current, that is, electrons. The resisting conductor generates heat, spending some of the energy of the current passing through it, thereby reducing its strength. Resistance is calculated in Ohms (Ohms), and the letter (R) is used in the formulas.

    Formulas for calculating current characteristics

    LEP

    Using three physical quantities, one can calculate the characteristics of the current using Ohm's Law. It is expressed by the formula:

    I = U / R

    Where I is the current strength, U is the voltage on the circuit section, R is the resistance.

    From the formula, we see that the current strength is calculated by dividing the voltage value by the resistance value. From here we have the wording of the law:

    The current is directly proportional to the voltage and inversely proportional to the resistance of the conductor.

    From this formula you can mathematically calculate its other components.

    Resistance:

    R = U / I

    Voltage:

    U = I * R

    It is important to note that the formula is valid only for a specific section of the chain. For a complete, closed circuit, and also other particular cases, there are other Ohm laws.

    Video plot

    Effect of current on different materials and living things

    Different chemical elements under the action of current behave differently. Some superconductors do not resist the electrons moving through them, without causing any chemical reaction. Metals, with excessive tension for them, can break down, melt. Dielectrics that do not pass current do not interact with it at all and thus protect the environment from it. This phenomenon is successfully used by man in the insulation of wires with rubber.

    For living organisms, the current is an ambiguous phenomenon. He is able to have both beneficial and destructive effects. People have long used controlled discharges for medicinal purposes: from lung stimulating brain activitydischarges, to powerful electric shocks that can start a stopped heart and bring a person back to life. A strong discharge can lead to serious health problems, burns, tissue death and even instant death. When working with electrical appliances, you need to follow safety regulations.

    In nature, you can find a lot of phenomena in which electricity plays a key role: from deep-sea creatures (electric rays), able to beat with electricity, to lightning during thunderstorms. Man has long mastered this natural power and skillfully uses it, thanks to which all modern electronics work.

    Loading ...Loading ...

    It should be remembered that the phenomena of nature can be both beneficial and harmful to humans. Studying at school and continuing education helps people to correctly use the phenomena of the world for the benefit of society.


    Related news


    How to choose meat
    How to connect the buffer
    Cara Delevingne rests with friends in Mexico
    Montessori Mathematics
    How to dress for a music festival
    Triumph Bonneville Model